Fixed Installable Micrometer (FIM)

The FIM is used for continuous measurement of borehole axial deformations. Similar to the sliding micrometer and the Trivec, the FIM is based on the cone-sphere setting principle. Probe lengths from 1 to 5 m are available. In boreholes with measuring tubes for Sliding Deformeter, Sliding Micrometer or Trivec, sections can be equipped with FIM(s) for continuous measurements. The FIM is fixed in the measuring tube between two measuring marks and connected to the data acquisition system.

Downloads

Médéric Piedevache

Engineering Geologist ENSG

Member of the extended executive board
Branch manager Nancy, France

T +33 (0) 3 83 94 04 50
E-Mail

vCard   |   QR Code

Markus Stolz

Civil Engineer

Member of the extended executive board
Division manager geotechnics /
Geotechnical instrumentation and measurements / hiDCon

T +41 (0) 44 806 29 41
E-Mail

vCard   |   QR Code

Thierry Krummenacher

Engineering Geologist ETHZ

Project Manager Geotechnics

T +41 (0) 44 806 29 47
E-Mail

vCard   |   QR Code